rice husk briquette charcoal extruder machine for making bbq charcoal rods
Introduction of briquette machine
There are several methods available for densifying biomass. Screw press briquetting is a popular
densification method. This process can produce denser and stronger biomass briquettes compared
with piston presses. After feeding into the hopper, the raw material is conveyed and compressed
by a screw worm in biomass briquetting.
1.ZBJ-I Briquette charcoal extruder machine (With Motor 11KW)
This model of biomass briquette making machine equip with gear reducer for energy saving.The
model ZBJI and ZBJII can produce the same products for diameter 30,40, 50mm
2.ZBJ-II Briquette charcoal extruder machine (With Motor 15KW)
This model of biomass briquette making machine is the old type without gear reducer, which need
15KW motor bigger power than ZBJI. But it have bigger capacity than ZBJ
3.ZBJ-III Briquette charcoal extruder machine(With Motor 18.5KW)This model of biomass briquette making machine is special big bigger diameter biomass briquettes
such as 60,70,80,90,100mm
Motor Power (kw)
Diameter: of finished products (mm)
The screw shaft is manufactured with a milling machine which guarantees that the distance between
every screw is the same, and the angle of every screw is the same.
The wear sleeve can be used for 1-2 years.The former is made from a whole steel bar through a water
jet cutting system so that the inner face is smooth. Therefore, it’ll be easier to form and save energy.
This is why the finished produces such as sawdust briquettes are smooth.
we adopted two heat collars which are made from thick copper wires and are ceramic inside.
It has two functions, one is you can clean it easily. The other is that you can discharge the inputted
material when it is jammed.